Let’s talk about what this lamp actually does.
Here’s the deal: we built this halogen infrared lamp to be a focused powerhouse. It’s a 500W unit packed into a 400mm length, so you get intense, targeted heat exactly where you need it. No need to overhaul your whole system just to get serious warmth. It fires up fast. Seriously fast. That means you cut down on waiting around, and you keep your production cycles moving. No lag, no fuss. And it’s designed to fit right into what you already have. It runs on standard industrial voltage, so it drops straight into your existing control panels. No rewiring the whole supply. You just hook it up, and you’re good to go. Control is simple, too. Use a standard dimmer or an SSR, and you can dial in the exact heat you want, every single time. Predictable. Repeatable. That’s what you need on the shop floor.
What’s under the hood.
The heart of it is the halogen cycle inside a quartz envelope. That’s what keeps the filament stable, even when things get seriously hot. No blackening. No drop-off in performance. Just steady, consistent output that you can count on. And it delivers shortwave infrared heat, which means it goes straight to work on your target. It doesn’t waste time heating the air around it. It hits the spot and gets the job done. The connections are built for the real world. It’s got an R7s base, which gives you a solid, low-resistance link that won’t loosen up when things heat up and cool down. That also means swapping it out is a breeze. If you’re already using an R7s-mounted heater, this is a direct replacement. Just pop the old one out, put this one in. No modifications needed.
Where it shines.
This lamp is your go-to when you need precision heating in a tight space. Think plastic welding, curing adhesives, or preheating smaller parts. The 400mm length gives you a good-sized heating zone, but it’s still compact enough to fit into smaller machines. You get that rapid heat-up, rock-solid output, and replacement that’s genuinely simple. Now, one thing to keep in mind: with that 500W power density, you need to give it proper breathing room. Make sure you’ve got enough airflow and thermal management around the lamp. Otherwise, nearby components and wiring can get too hot. Just plan your mounting distance and ventilation, and you’re set for reliable performance.