Let’s talk about the 350mm Quartz Halogen Lamp
If you’re dealing with industrial heating, you know the biggest headache is waiting for things to warm up. That’s why we built this specific lamp. It’s 350mm long, pulls 415V, and pumps out 1500W. Basically, it’s designed for when you need heat—and you need it now. Why the 415V setup? Here’s the thing: by running at 415V, we can hit that 1500W mark without stressing your circuits. Since most industrial grids already use three-phase power, it fits right in. The real win here is the speed. The heat density is so high that the lamp hits its operating temperature almost the second you flip the switch. No more idling. No more wasted cycle times. It just works. The build quality We didn’t use cheap glass here. It’s high-purity quartz. Why? Because standard glass would just shatter under this kind of thermal shock. Inside, there’s a tungsten filament and a halogen cycle. That cycle is the secret sauce—it stops the tungsten from gunking up the inside of the tube. This keeps the glass clear and the heat flowing steadily, even after long hours of use. Plus, we kept the connectors standard. You can just pop it into your existing array and get back to work. No hunting for weird adapters. Where this actually lives You’ll usually see these in shrink tunnels, PET blowing machines, or curing ovens. They blast shortwave IR radiation that cuts right through plastics and coatings. A few warnings (from experience) Look, 1500W is a lot of energy. If your reflectors are crooked, you’re going to burn them out. Period. Make sure your cooling fans are actually up to the task, or you’ll deal with some nasty heat buildup around the housing. And here is a pro tip:don’t touch the glass. If you get a fingerprint or a smudge of oil on that quartz tube during installation, it creates a hot spot. When the lamp heats up, that spot becomes a weak point, and the glass can crack. Grab some isopropyl alcohol, give the tube a good wipe-down, and then power it up. Your future self will thank you.